Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
during high temperature deformationJaladurgam, N. R.*; Lozinko, A.*; Guo, S.*; Harjo, S.; Colliander, M. H.*
Materialia, 22, p.101392_1 - 101392_4, 2022/05
The load redistribution between and within phases in eutectic high entropy alloy AlCoCrFeNi was measured using in-situ neutron diffraction during tensile deformation at 973 K. The load partitioning between phases is reversed compared to lower temperatures, with L1
becoming the stronger phase. The evolution of the orientation-specific stresses and strains in the L1 phase suggests that cube slip dominates the response. The low strength, internal load transfer and ideally plastic response of the B2 phase indicate a change in deformation mechanism compared to lower temperatures.
Lam, T.-N.*; Tsai, C.-W.*; Chen, B.-K.*; Lai, B.-H.*; Liu, H.-C*; 川崎 卓郎; Harjo, S.; Lin, B.-H.*; Huang, E.-W.*
Metallurgical and Materials Transactions A, 51(10), p.5023 - 5028, 2020/10
被引用回数：12 パーセンタイル：61.56(Materials Science, Multidisciplinary)Substitution of Ge for Mn increases the elastic moduli of different 
orientations of the CoCrFeMnNi-based high-entropy alloy. Our findings indicate that tuning minor element compositions may result in improved strength-ductility combination. The underlying deformation mechanisms of CoCrFeNiGe
were examined by 
neutron diffraction and analysis of the associated diffraction profiles during tensile deformation. The strain-hardening response of CoCrFeNiGe exhibited a dominant mechanism of mechanical twinning at moderate and large strains at room temperature. The evolution of the bulk work hardening rate was consistent with the convolutional multiple whole profile fitting results, which exhibited a continuous increase in twin formation probability.
